This is a collection of six 65mm diameter leather stamps featuring happy otherworldly visitors from somewhere up there. relax, relax - they left their probes at home.

I print all leather stamps with 4 walls at 50% triangular infill at 10% moisture. Anything less can result in failure of the wall structures.

A rigid filament is recommended, such as PLA+, CF PLA etc. Cheap PLA doesn't work well. If that's all you have, add an extra wall line for increased rigidity. After printing I use a small plastic brush to remove any small stringing.

Stamps can be used for other fabrics and materials. I recommend testing a small piece before stamping any expensive materials. I dampen leather before stamping for a better impression.

If you need the stamps in a different diameter, feel free to send me a message and I will resize them for you as time permits. NOTE - resizing some designs to a smaller diameter may result in poor details, loss of image clarity. I'll see what I can do. Also if you want the left/right orientation reversed so you have two mirror images, send me a message and I will design a reverse image as time permits.

Remix to your heart's desire, these are designed to be personalized. I recommend a minimum 2.5mm outer wall thickness from the edge of the outer perimeter to the extrusion for better rigidity and wall strength. A 0.4mm nozzle works best, but the stamps can be successfully printed with a 0.6 nozzle, just be watchful of very small lines, extrusions etc.

Dry your filament, eat your vegetables, don't do drugs.

About me I’m an old-school veteran chef and I’m battling kidney disease. With it has come a lot of life changes, some great and some small. After a lifetime of 80 & 90-hour work weeks, the idea of not working is an absolutely alien concept, so I tinker, create and design to keep myself busy. I love to share my designs with Fellow Creators.